Bittner
Industries, Inc.
PO Box 10265
Prichard, AL 36610
251.457.7671
fax:251.456.2252
sales@bittnerindustries.com

To Bittner Industries, Quality Control and Service are paramount. It is their proudest claim and constant goal to deliver a great product., Warranty it, and to keep it operative once it is delivered.

Bittner Industries, Inc.
© Copyright 2000. All rights reserved.

Rubber Lining Quality Tests

Prior to shipment, all rubber lined products fabricated by us  will be subjected to a series of quality tests:

1. A complete check against all rubber lining details on customer prints is made to assure lining has been applied to the proper areas with the correct gauge stock.

2. General appearance is observed and noted.

3. Detection of trapped air is accomplished by holding a light near the surface and looking down the stock face for shadowed areas.

4. All laps are closely inspected for looseness and  uniformity.

5. A high frequency spark tester is passed over the rubber lining in a sweeping, continuous stroke. A pinhole leak will be seen as a white  or blue arc jumping from the spark tester wand through the lining to the metal.  If a leak is detected, this area is marked and repaired prior to curing.

6. A second spark test is made after the cure is completed.